Choosing a Frameless Wall-to-Wall Shower Screen
Wall-to-wall screens suit alcove showers with a straight recess. The glass runs between the two side walls and closes the opening with a hinged door. Here's what you need to know before you order.
Measure Your Opening
Measure the gap between the walls at the top, middle, and bottom, because tiled walls are rarely perfectly even. Then match the screen to your smallest measurement.
- Widths: 800mm to 1500mm in 50mm steps
- Height: 2100mm
- Wall clips: the 900mm screen suits openings from 890mm to 900mm
- U channel: the same screen suits openings from 890mm to 905mm, a slightly wider allowance
The 900mm screen has a 700mm door.
Glass, Hardware and Handling
Each screen is made from 10mm toughened safety glass with Australian Standard Mark certification (AS/NZS 2208). In the unlikely event of breakage, it is designed to fall into smaller, less hazardous pieces. Both sides carry an easy-clean nano coating.
The door installs left- or right-hand, so you can position the entry around vanities, toilets and towel rails. Solid brass hardware comes in Chrome, Matte Black, Brushed Nickel, Brushed Gold, or Gunmetal, backed by a 5-year warranty.
Splash Control and Care
Wall-to-wall screens contain splashes better than open-entry walk-in designs. The door panel includes a bottom sweep, and an optional water seal bar adds extra protection. A squeegee or microfibre cloth after each shower keeps the glass clear, and a mild, non-abrasive cleaner handles regular cleaning.
Before You Order
AROVA supplies the screen only, so we recommend lining up a licensed glazier or builder. Delivery is available to most Melbourne Metro suburbs, and pick-up is free from our three locations.
Select your width above, or browse our shower screen collection.
